M-CONTROLLERS

Product Image
Applications
  • • Underground Parking Garages,
  • • Water Treatment Plants,
  • • Municipal Service Garages,
  • • Aircraft Hangers,
  • • Chiller Monitoring,
  • • Warehouses,
  • • Automobile Dealerships & Battery Charging / Storage
  • The M-Controller is a multi-channel controller and alarm unit that utilizes both digital and analog communications to interface with a maximum of 32 remote digital transmitter/sensors, and 8 analog transmitter/sensors. Common relay con-figurations include voting, averaging, delay on actuation and deactuation, normally/not-normally energized and latching. An additional feature includes 24 VDC transistor outputs for a horn and strobe. An RS-422 output responds as a RTU Slave using MODBUS protocol which allows the controller to provide read status information only. The M-Controller can be programmed with the onboard key pad or the M-View Software which is downloaded using the RS-232 interface. Also available is an analog output card that includes eight 4-20 mA analog outputs. Each analog output can be de¬nied in complex fashions allowing the averaging of several input signals and outputs a linear 4-20 mA signal. M-Relay modules are designed to allow expandability for control to the M-Controller over an RS-485 communication link, which allows flexibility during installation and wiring. M-Relays operate on 24 VAC/VDC and may be powered via the port power of the M-Controller or directly from a local power source. Each relay module is addressed from 0 to 11 and is de¬nied by a four position dipswitch. The M-Controller has three relays (1, 2, and 3) after which the M-Relay can be added and will correspond with 4 through 99. The M-Relay module is available with 2, 4, 6, or 8 relays per module. Refer to all applicable Federal, State, Provincial and Local Health and Safety laws and regulations before using these products

    The M-Controllers are covered by ACI's Two (2) Year Limited Warranty, which is located in the front of ACI's Sensors & Transmitters catalog or can be found on ACI's web site, which is: www.workaci.com.
ITEM NUMBER ITEM DESCRIPTION  LIST PRICE VOC PRICE
M-ANNUNCIATOR M-Annunciator FOR M-Controller $500.00 $308.13
M-CONTROLLERX-000 Controller, 32 digital QEL sensors, eight 4-20mA inputs, 3 DPDT Relays, Steel Nema 1 $1,825.00 $1,124.66
M-CONTROLLERX-00P Controller, 32 digital QEL sensors, eight 4-20mA inputs, 3 DPDT Relays, Steel Nema 1, Real Time Monitoring Software $3,965.00 $2,443.43
M-CONTROLLERX-T00 Controller, 32 digital QEL sensors, eight 4-20mA inputs, 3 DPDT Relays, Steel Nema 1, eight 4-20mA output card $2,180.00 $1,343.43
M-CONTROLLERX-T00 Controller, 32 digital QEL sensors, eight 4-20mA inputs, 3 DPDT Relays, Steel Nema 1, eight 4-20mA output card $2,180.00 $1,343.43
M-RELAY-5X-2 Relays for M-Controller, 2 X DPDT, 5 amps $370.00 $228.01
M-RELAY-5X-4 Relays for M-Controller, 4 X DPDT, 5 amps $450.00 $277.31
M-RELAY-5X-6 Relays for M-Controller, 6 X DPDT, 5 amps $495.00 $305.04
M-RELAY-5X-8 Relays for M-Controller, 8 X DPDT, 5 amps $540.00 $332.78
M-SWITCH Manual Input Switch for M-Controller / Q4C Controller $400.00 $246.50
M-TRANSFORMER Transformer, 150VA, for M-Controller $250.00 $154.06
R-SWITCH Remote Reset Switch for M-Switch $400.00 $246.50
84330-013-000 M-Controller/Q4C programming Cable  $45.00 $27.73
84330-014-000 M-View Software CD for M-Controller/Q4C $85.00 $52.38
84330-101-000 8 Channel Analog Output Card, M-Controller $310.00 $191.04